CHECK FREEZE FRAME DATA
The DCU (emission control ECU assembly) records vehicle and driving condition information as freeze frame data the moment a DTC is stored.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Urea Selective Catalytic Reduction / Trouble Codes.
Select a DTC to display the freeze frame data.
Check the freeze frame data for the output DTC.
LIST OF FREEZE FRAME DATA
| Engine Run Time |
| Vehicle Speed |
| Engine Speed |
| Coolant Temperature |
| Accelerator Position |
| Engine Exhaust Flow Rate |
| Auxiliary Battery Voltage |
| Ambient Temperature |
| SCR Exhaust Temperature |
| Target Reductant Injection Volume |
| Reductant Level |
| Reductant Density |
| Reductant Pipe Heater Duty |
| Reductant Tank Heater Duty |
| Reductant Tank Temperature |
| Reductant Pump Pressure |
| Reductant Pump Speed |
| Reductant Pump Duty |
| Reductant Pump Current |
| Reductant Pump Control Mode |