Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › UREA SELECTIVE CATALYTIC REDUCTION SYSTEM › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0400651 UREA SELECTIVE CATALYTIC REDUCTION SYSTEM C

N04C-WA EMISSION CONTROL  UREA SELECTIVE CATALYTIC REDUCTION SYSTEM  U003888  Vehicle Communication Bus B Performance Bus off  


DESCRIPTION

The DCU (emission control ECU assembly) sends and receives data via CAN bus B communication.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate Memory
U003888 Vehicle Communication Bus B Performance Bus off Diagnosis Condition:
·

Ignition switch ON.

·

Battery voltage is 9 V to 16 V.


Malfunction Status:
·

DCU (emission control ECU assembly) cannot receive all messages from CAN B.


Malfunction Duration:
·

1 second or more.


·

CAN communication system

·

DCU (emission control ECU assembly)


Class A AdBlue consumption warning light:
Does not come on
DTC stored

MONITOR DESCRIPTION

Description of malfunction

Interruption in CAN communication is detected.


Reset condition

After having restored to the normal conditions.


CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
U003888 Ignition switch ON for 1 second or more.

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Urea Selective Catalytic Reduction / Trouble Codes.


e.

Read the DTCs.

Result:
Result Proceed to
DTC U003888 is output A
DTC U003888 is not output B




A

B