23810A
1.INSPECT COMMON RAIL ASSEMBLY
| *a | Component without harness connected
(Fuel Pressure Sensor) |
Inspect the fuel pressure sensor.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 43 to 53 kΩ |
| 1 - 3 | 20°C (68°F) | 38 to 48 kΩ |
| 2 - 3 | 20°C (68°F) | 4.2 to 5.2 kΩ |
If the result is not as specified, replace the common rail assembly.
| *a | Component without harness connected
(Fuel Pressure Discharge Valve) |
Inspect the fuel pressure discharge valve.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 0.37 to 0.57 Ω |
If the result is not as specified, replace the common rail assembly.