Home › Engine / Hybrid System › N04C-WA (FUEL) › FUEL ADDITION CUT VALVE ASSEMBLY › from 2019.08
RM2850E _51 Engine / Hybrid System _082613 N04C-WA FUEL _0400951 FUEL ADDITION CUT VALVE ASSEMBLY G

N04C-WA FUEL  FUEL ADDITION CUT VALVE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 22214B 1.INSPECT FUEL ADDITION CUT VALVE ASSEMBLY

a.
A403345C03
0.063,0.083 0.281,0.219 0.219,0.135 10 false *a
*a Component without harness connected
(Fuel Addition Cut Valve Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 10.3 to 11.3 Ω


HINT:

If the result is not as specified, replace the fuel addition cut valve assembly.