Home › Vehicle Interior › ENGINE HOOD / DOOR › CENTER DOOR (for Folding Type) › from 2019.08
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0356366 CENTER DOOR(for Folding Type) A

ENGINE HOOD / DOOR  CENTER DOOR(for Folding Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure below are for RHD vehicles.



PROCEDURE

Hide 74642 1.REMOVE FOLDING DOOR ASSIST GRIP

a.
B333437

Remove the 2 screws and the folding door assist grip.


Hide 69298F 2.REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH

a.
B333438

Remove the clip.


b.

Using a clip remover, disengage the guide and 5 clips to remove the No. 2 door inside handle bezel LH.


Hide 69278 3.REMOVE NO. 1 DOOR INSIDE HANDLE BEZEL LH

a.
B333439

Remove the clip.


b.

Using a clip remover, disengage the 2 clips and remove the No. 1 door inside handle bezel LH.


Hide 69302B 4.REMOVE CENTER DOOR INSIDE HANDLE LOCK SUB-ASSEMBLY

a.
B333440

Remove the 2 bolts.


b.
B333441

Remove the 3 screws.


c.
B333442

Disengage the 2 guides as shown in the illustration.


d.
B333443

Disengage the No. 2 center door remote control cable sub-assembly to remove the center door inside handle lock sub-assembly.


Hide 69303B 5.REMOVE CENTER DOOR LOCK OUTSIDE HANDLE SUB-ASSEMBLY (w/o Cover)

a.
B333444

Remove the screw and the center door lock outside handle sub-assembly.


Hide 69303B 6.REMOVE CENTER DOOR LOCK OUTSIDE HANDLE SUB-ASSEMBLY (w/ Cover)

a.
B554706

Remove the screw and the center door lock outside handle sub-assembly.


b.

Detach the 3 claws and 2 guides to remove the cover as shown in the illustration.


Hide 62989A 7.REMOVE CENTER DOOR LOCK COVER (w/ Cover)

a.
B554818C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the 3 claws and 2 guides to remove the center door lock cover as shown in the illustration.


Hide 67254 8.REMOVE NO. 1 CENTER DOOR INSIDE STOPPER

a.
B333445

Remove the 6 bolts and 2 screws and the No. 1 center door inside stopper and stopper plate.


Hide 67087 9.REMOVE CENTER DOOR FRONT DUST SEAL PLATE SUB-ASSEMBLY

a.
B333446

Remove the 3 clips and center door front dust seal plate sub-assembly.


Hide 67088 10.REMOVE CENTER DOOR REAR DUST SEAL PLATE SUB-ASSEMBLY

HINT:

Use the same procedure as for the center door front dust seal plate sub-assembly.


Hide 11.REMOVE NO. 2 DOOR CUSHION GUM

a.
B333447

Disengage the claw and remove the No. 2 door cushion gum.


Hide 12.REMOVE CUSHION

a.
B333448

Disengage the 2 claws and remove the 2 cushions.


Hide 68705 13.REMOVE OUTER NO. 1 CENTER DOOR HINGE SUB-ASSEMBLY

a.
B333449C01
2.771,0.615 3.01,1 true 2.677,1.75 3.073,2.208 3.073,2.208 2.688,2.667 true 3.01,1 3.323,1.198 0.313,0.198 10 false *1 3.115,2.125 3.427,2.323 0.313,0.198 10 false *2
*1 Outer No. 1 Center Door Hinge Sub-assembly
*2 Outer No. 2 Center Door Hinge Sub-assembly


Remove the 12 screws, outer No. 1 center door hinge sub-assembly, 2 outer No. 2 center door hinge sub-assemblies and 3 center door hinge spacers.


Hide 69068A 14.REMOVE NO. 2 CENTER DOOR REMOTE CONTROL CABLE SUB-ASSEMBLY

a.
B333450

Remove the 2 bolts and No. 2 center door remote control cable sub-assembly.


Hide 67855C 15.REMOVE CENTER DOOR FRONT WEATHERSTRIP

Hide 67856C 16.REMOVE CENTER DOOR REAR WEATHERSTRIP

Hide 67857D 17.REMOVE CENTER DOOR CENTER WEATHERSTRIP