Use the same procedure for RHD and LHD vehicles.
The procedure below are for RHD vehicles.
1.APPLY BODY GREASE
Apply body grease to sliding sections of the lock, etc.
67857D
2.INSTALL CENTER DOOR CENTER WEATHERSTRIP
67856C
3.INSTALL CENTER DOOR REAR WEATHERSTRIP
67855C
4.INSTALL CENTER DOOR FRONT WEATHERSTRIP
69068A
5.INSTALL NO. 2 CENTER DOOR REMOTE CONTROL CABLE SUB-ASSEMBLY
Install the No. 2 center door remote control cable sub-assembly with the 2 bolts.
68705
6.INSTALL OUTER NO. 1 CENTER DOOR HINGE SUB-ASSEMBLY
| *1 | Outer No. 1 Center Door Hinge Sub-assembly |
| *2 | Outer No. 2 Center Door Hinge Sub-assembly |
Install the outer No. 1 center door hinge sub-assembly, 2 outer No. 2 center door hinge sub-assemblies and 3 center door hinge spacers with the 12 screws.
7.INSTALL CUSHION
Engage the 2 claws and install the 2 cushions.
8.INSTALL NO. 2 DOOR CUSHION GUM
Engage the claw and install the No. 2 door cushion gum.
67087
9.INSTALL CENTER DOOR FRONT DUST SEAL PLATE SUB-ASSEMBLY
Install the center door front dust seal plate sub-assembly with the 3 clips.
67088
10.INSTALL CENTER DOOR REAR DUST SEAL PLATE SUB-ASSEMBLY
Use the same procedure as for the center door front dust seal plate sub-assembly.
67254
11.INSTALL NO. 1 CENTER DOOR INSIDE STOPPER
Install the No. 1 center door inside stopper and stopper plate with the 6 bolts and 2 screws.
69303B
12.INSTALL CENTER DOOR LOCK OUTSIDE HANDLE SUB-ASSEMBLY (w/o Cover)
Apply MP grease to the center door lock outside handle sub-assembly.
Install the center door lock outside handle sub-assembly with the screw.
62989A
13.INSTALL CENTER DOOR LOCK COVER (w/ Cover)
|
Install in this Direction |
Attach the 2 guides and 3 claws to install the center door lock cover as shown in the illustration.
69303B
14.INSTALL CENTER DOOR LOCK OUTSIDE HANDLE SUB-ASSEMBLY (w/ Cover)
Apply MP grease to the center door lock outside handle sub-assembly.
Install the center door lock outside handle sub-assembly with the screw.
69302B
15.INSTALL CENTER DOOR INSIDE HANDLE LOCK SUB-ASSEMBLY
Apply MP grease to the sliding parts of the center door inside handle lock sub-assembly.
Engage the No. 2 center door remote control cable sub-assembly to install the center door inside handle lock sub-assembly.
Engage the 2 guides as shown in the illustration.
Tighten the 3 screws.
Tighten the 2 bolts.
69278
16.INSTALL NO. 1 DOOR INSIDE HANDLE BEZEL LH
Engage the 2 clips and install the No. 1 door inside handle bezel LH.
Install the clip.
69298F
17.INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
Engage the guide and 5 clips to install the No. 2 door inside handle bezel LH.
Install the clip.
74642
18.INSTALL FOLDING DOOR ASSIST GRIP
Install the folding door assist grip with the 2 screws.