Home › Vehicle Interior › ENGINE HOOD / DOOR › AUTO CENTER DOOR CANCEL SWITCH (for Glide Type) › from 2019.08
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0401955 AUTO CENTER DOOR CANCEL SWITCH(for Glide Type) G

ENGINE HOOD / DOOR  AUTO CENTER DOOR CANCEL SWITCH(for Glide Type)  INSPECTION  


PROCEDURE

Hide 84962 1.INSPECT POWER SLIDE DOOR MAIN SWITCH

a.
B555466C01
0.802,1.854 1.021,2.042 0.219,0.188 10 false *a
*a Component without harness connected
(Power Slide Door Main Switch)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 6 Switch off (Not pressed) Below 1 Ω
3 - 6 Switch on (Pressed) Below 1 Ω


If the result is not as specified, replace the power slide door main switch.