Home › Drivetrain › A861E (AUTOMATIC TRANSMISSION / TRANSAXLE) › FLOOR SHIFT ASSEMBLY › from 2019.08
RM2850E _52 Drivetrain _082622 A861E AUTOMATIC TRANSMISSION / TRANSAXLE _0399387 FLOOR SHIFT ASSEMBLY G

A861E AUTOMATIC TRANSMISSION / TRANSAXLE  FLOOR SHIFT ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When moving the shift lever from P to R with the ignition switch ON and the brake pedal depressed, make sure that the shift lever moves smoothly and correctly to P.


b.
C419252C01
2.542,0.677 2.677,0.875 0.135,0.198 10 false -
V113147

Shift while holding the shift lever knob button in.
V113148

Shift normally


When shifting to each position, make sure that the shifting lever moves smoothly, can be moderately operated and the position indicator displays correctly.

Ranges which can be operated without pressing the shift lever knob button:

R → N → D → 4, 2/L → 4 → D → N


Ranges which can be operated only while pressing the shift lever knob button:

P → R, 4 → 2/L, N → R → P



c.

Start the engine, and make sure that the vehicle moves forward when shifting from the N to D position, and moves in reverse when shifting to the R position.

If the operation is not as specified, inspect the park/neutral position switch assembly or check the transmission control cable assembly installation condition.


Hide 2.INSPECT SHIFT LOCK OPERATION

a.

Move the shift lever to P.


b.

Turn the ignition switch off.


c.

Check that the shift lever cannot be moved from P to any other position.


d.

Turn the ignition switch to ON, depress the brake pedal, and check that the shift lever can be moved from P to any other position.


Hide 3.INSPECT SHIFT LOCK RELEASE BUTTON OPERATION

a.

Turn the ignition switch off.


b.

When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.


Hide 4.INSPECT KEY INTERLOCK OPERATION

a.

Turn the ignition switch to ON.


b.

Depress the brake pedal and move the shift lever to any position other than P.


c.

Check that the ignition key cannot be turned to LOCK.


d.

Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.