Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM2850E _58 Vehicle Interior _073141 METER / GAUGE / DISPLAY _0357098 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Brake System Control Module  U0151  Lost Communication with Restraints Control Module  U023A  Lost Communication with Front Camera Module  U1104  Lost Communication with Driving Support ECU  


DESCRIPTION

The combination meter assembly communicates with the ECM, shift control ECU, skid control ECU assembly, front steering control ECU, power steering ECU assembly, DRS ECU (rear steering control ECU), main body ECU (multiplex network body ECU), airbag ECU assembly, radio receiver assembly*1, No. 1 headlight ECU sub-assembly LH*2, forward recognition camera*3 and millimeter wave radar sensor assembly*3 via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
U0100 Lost Communication with ECM / PCM "A" When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with ECM continues for 2 seconds or more


·

ECM

·

CAN communication system

·

Combination meter assembly


DTC stored -
U0129 Lost Communication with Brake System Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with ECM continues for 2 seconds or more


·

Skid control ECU (Brake actuator assembly)

·

CAN communication system

·

Combination meter assembly


DTC stored -
U0151 Lost Communication with Restraints Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with airbag ECU assembly continues for 10 seconds or more


·

Airbag ECU assembly

·

CAN communication system

·

Combination meter assembly


DTC stored -
U023A Lost Communication with Front Camera Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with forward recognition camera continues for 10 seconds or more


·

Forward recognition camera

·

CAN communication system

·

Combination meter assembly


DTC stored -
U1104 Lost Communication with Driving Support ECU When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with millimeter wave radar sensor assembly continues for 10 seconds or more


·

Driving support ECU assembly

·

CAN communication system

·

Combination meter assembly


DTC stored -

PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes
50001 122

Result:
Result Proceed to
DTC U0100, U0129, U0151, U023A or U1104 is output. A
DTC U0100, U0129, U0151, U023A and U1104 are not output. B



A

B