Use the same procedure for the Front Side and Rear Side.
The procedure listed below is for the Rear Side.
87138R
1.REMOVE REAR HEATER BLOWER RESISTOR
Disconnect the connector.
Remove the 2 screws and rear heater blower resistor.
87187A
2.REMOVE BLOWER MOTOR LEAD WIRE
Disconnect the connector.
Remove the packing.
Remove the 3 screws and blower motor lead wire with base.
Remove the blower motor lead wire from the base.
87103H
3.REMOVE REAR HEATER BLOWER CASE SUB-ASSEMBLY
| *a | Claw |
Pull up the claw and rotate it in the direction of the arrow shown in the illustration to remove the rear heater blower case sub-assembly.
87107R
4.REMOVE REAR HEATER UNIT SUB-ASSEMBLY
Remove the 6 screws and upper heater case.
|
Remove in this Direction |
Pull up the air duct sub-assembly with rear heater unit sub-assembly and remove the air duct sub-assembly with rear heater unit sub-assembly.
Remove the rear heater unit sub-assembly from the air duct sub-assembly.