62384Q
1.REMOVE SIDE WINDOW CLIP CAP
Remove the side window clip cap.
| *A | w/o Automatic Door System | *B | w/ Automatic Door System |
| *1 | Side Window Clip Cap | - | - |
67745
2.REMOVE CENTER DOOR TRIM MOULDING
Remove the center door trim moulding.
| *A | w/o Automatic Door System | *B | w/ Automatic Door System |
| *1 | Center Door Trim Moulding | - | - |
68113C
3.REMOVE GLIDE DOOR GLASS
The glide door glass may fall while performing this procedure. Therefore, use suction cups to hold the glide door glass from the outside of the vehicle.
|
Protective Tape |
Apply protective tape to the outer surface of the door panel to prevent scratches.
Install the suction cups to the glide door glass.
From the interior, insert a piano wire between the door panel and glass.
| *1 | Center Door No. 2 Fix Window Pin |
| *2 | Center Door No. 1 Fix Window Pin |
| *a | Piano Wire |
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
When separating the glass from the vehicle, Do not damage the vehicle paint or interior/exterior ornaments.
Cut through the adhesive by pulling the piano wire around the glass.
Using suction cups, disconnect the 2 center door No. 1 fix window pins and 2 center door No. 2 fix window pins remove the glide door glass.
Be careful not to drop the glide door glass.
68294F
4.REMOVE SIDE WINDOW ADHESIVE DAM
When reusing the glide door glass:
| *a | Backside |
Using a gasket scraper, remove the 3 side window adhesive dams.
Do not damage the glide door glass.
Be sure to replace the side window adhesive dam with a new one.
68165B
5.REMOVE GLIDE DOOR GLASS MOULDING
When reusing the glide door glass:
| *a | Backside |
Using a gasket scraper, remove the 2 glide door glass mouldings.
Do not damage the glide door glass.
Be sure to replace the glide door glass moulding with a new one.
62267U
6.REMOVE SIDE WINDOW ADHESIVE DAM
When reusing the glide door glass:
| *a | Backside |
Using a gasket scraper, remove the side window adhesive dam.
Do not damage the glide door glass.
Be sure to replace the side window adhesive dam with a new one.
68217G
7.REMOVE CENTER DOOR NO. 2 FIX WINDOW PIN
When reusing the glide door glass:
| *a | Backside |
Using a gasket scraper, remove the 2 center door No. 2 fix window pins.
Do not damage the glide door glass.
Be sure to replace the center door No. 2 fix window pin with a new one.
68217F
8.REMOVE CENTER DOOR NO. 1 FIX WINDOW PIN
When reusing the glide door glass:
| *a | Backside |
Using a gasket scraper, remove the 2 center door No. 1 fix window pins.
Do not damage the glide door glass.
Be sure to replace the center door No. 1 fix window pin with a new one.