Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › PARTICULATE MATTER SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0403532 PARTICULATE MATTER SENSOR A

N04C-WA ENGINE CONTROL  PARTICULATE MATTER SENSOR  REMOVAL  


PROCEDURE

Hide 894A1 1.REMOVE PARTICULATE MATTER SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.


a.
A450267

Disconnect the connector and 4 clamps.


b.

Remove the 2 bolts and disconnect the particulate matter sensor.


c.
A450268N01
1.01,1.656 1.135,1.656 1.135,1.656 1.427,1.24 true 0.74,1.583 1.073,1.75 0.333,0.167 10 true SST

Using SST, remove the particulate matter sensor.

SST
09224-00030