Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › ACCELERATOR PEDAL › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0403585 ACCELERATOR PEDAL A

N04C-WA ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78100 1.REMOVE ACCELERATOR PEDAL ASSEMBLY

a.

Disconnect the accelerator pedal connector.


b.
A102038

Remove the 2 bolts and accelerator pedal assembly.

NOTICE:
·

This accelerator pedal assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

·

Do not drop or strike the accelerator pedal assembly.

·

Do not disassemble the accelerator pedal assembly.