Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0403590 INTAKE AIR TEMPERATURE SENSOR G

N04C-WA ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89424G 1.INSPECT INTAKE AIR TEMPERATURE SENSOR (for Intake Manifold Side)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 5.79 to 7.34 kΩ
50°C (122°F) 1.99 to 2.44 kΩ


NOTICE:

When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.


If the result is not as specified, replace the intake air temperature sensor.


Hide 89424D 2.INSPECT INTAKE AIR TEMPERATURE SENSOR (for Intercooler Side)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.21 to 2.65 kΩ


NOTICE:

When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.


If the result is not as specified, replace the intake air temperature sensor.