Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › NITROGEN OXIDES SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0403593 NITROGEN OXIDES SENSOR A

N04C-WA ENGINE CONTROL  NITROGEN OXIDES SENSOR  REMOVAL  


PROCEDURE

Hide 89463C 1.REMOVE NO. 1 NITROGEN OXIDES SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A450256

Detach the 4 clamps.


b.

Disconnect the connector from the No. 1 nitrogen oxides sensor.


c.

Remove the 2 bolts and disconnect the No. 1 nitrogen oxides sensor.


d.
A450260N01
0.74,1.156 0.896,1.156 0.896,1.156 1.771,0.792 true 0.385,1.083 0.708,1.24 0.323,0.156 10 true SST

Using SST, remove the No. 1 nitrogen oxides sensor.

SST
09224-00012  


Hide 89463D 2.REMOVE NO. 2 NITROGEN OXIDES SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A450259

Detach the 3 clamps.


b.

Disconnect the connector from the No. 2 nitrogen oxides sensor.


c.

Remove the 2 bolts and disconnect the No. 2 nitrogen oxides sensor.


d.
A450261N01
0.573,1.677 0.74,1.677 0.74,1.677 1.323,0.938 true 0.198,1.625 0.531,1.802 0.333,0.177 10 true SST

Using SST, remove the No. 2 nitrogen oxides sensor.

SST
09224-00012