Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › UREA INJECTOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0403727 UREA INJECTOR G

N04C-WA EMISSION CONTROL  UREA INJECTOR  INSPECTION  


PROCEDURE

Hide 23720 1.INSPECT UREA INJECTOR ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 11.6 to 12.4 Ω


If the result is not as specified, replace the urea injector assembly.