Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › UREA PUMP CONTROL ECU › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0403728 UREA PUMP CONTROL ECU A

N04C-WA EMISSION CONTROL  UREA PUMP CONTROL ECU  REMOVAL  


PROCEDURE

Hide 89550 1.REMOVE EMISSION CONTROL ECU ASSEMBLY

a.
A451082

Remove the 2 bolts and emission control ECU assembly.


b.
A451083

Detach the clamp and disconnect the wire harness from the No. 2 urea pump control bracket.


c.
A451084

Raise the lever while pushing the lock on the lever and disconnect the connector from the emission control ECU assembly.

NOTICE:

After disconnecting a connector, make sure that dirt, water and other foreign matter does not contact the connector.



d.
A451086

Remove the 4 bolts, emission control ECU assembly, No. 1 urea pump control bracket and No. 2 urea pump control bracket.