Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › UREA PUMP CONTROL ECU › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0403728 UREA PUMP CONTROL ECU A

N04C-WA EMISSION CONTROL  UREA PUMP CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 89550 1.INSTALL EMISSION CONTROL ECU ASSEMBLY

a.
A451086

Install the emission control ECU assembly, No. 1 urea pump control bracket and No. 2 urea pump control bracket with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.
A451085

Connect the connector to the emission control ECU assembly.

NOTICE:

When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and urea pump control ECU.



c.
A451083

Attach the clamp and connect the wire harness to the No. 2 urea pump control bracket.


d.
A451082

Install the emission control ECU assembly with the 2 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)