Home › Engine / Hybrid System › N04C-WA (LUBRICATION) › OIL PRESSURE SWITCH › from 2019.08
RM2850E _51 Engine / Hybrid System _082618 N04C-WA LUBRICATION _0404094 OIL PRESSURE SWITCH G

N04C-WA LUBRICATION  OIL PRESSURE SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT FOR ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the engine oil pressure switch assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher


HINT:

If the value is not as specified, replace the engine oil pressure switch assembly.



c.

Connect the engine oil pressure switch assembly connector.