Home › Engine / Hybrid System › N04C-WA (LUBRICATION) › OIL LEVEL SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082618 N04C-WA LUBRICATION _0404095 OIL LEVEL SENSOR G

N04C-WA LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A157075C02
0.646,3.052 0.781,3.052 0.781,3.052 0.927,2.781 false 2.479,2.771 2.813,3.042 0.333,0.271 10 false *c 2.469,2.281 2.781,2.521 0.313,0.24 10 false *b 0.49,2.958 0.729,3.208 0.24,0.25 10 false *a 0.927,0.24 1.24,0.479 0.313,0.24 10 false *d
*a Float
*b Top
*c Bottom
*d Component without harness connected
(Engine Oil Level Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the engine oil level sensor.

1 - 2 Float at bottom 10 kΩ or higher
1 - 2 Float at top Below 1 Ω