Home › Engine / Hybrid System › N04C-WA (LUBRICATION) › ENGINE OIL COOLER › from 2019.08
RM2850E _51 Engine / Hybrid System _082618 N04C-WA LUBRICATION _0404097 ENGINE OIL COOLER A

N04C-WA LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 17201 1.REMOVE TURBOCHARGER SUB-ASSEMBLY

Hide 2.DISCONNECT WIRE HARNESS

a.
A448321

Detach the wire harness clamp.


Hide 16209 3.REMOVE NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A448311

Slide the clip and disconnect the hose from the No. 4 water by-pass pipe sub-assembly.


b.
A448312

Remove the 2 bolts.


c.
A448313

Remove the union bolt, gasket and No. 4 water by-pass pipe sub-assembly.


Hide 15700B 5.REMOVE OIL COOLER BRACKET

a.
A446922

Remove the bolt and oil cooler bracket.


Hide 6.REMOVE OIL COOLER COVER SUB-ASSEMBLY

a.
A446923

Remove the 15 bolts and oil cooler cover sub-assembly from the cylinder block.


b.

Remove the gasket and 4 O-rings.


Hide 15710 7.REMOVE OIL COOLER ASSEMBLY

a.
A446924

Remove the 4 nuts and oil cooler assembly.


b.

Remove the 2 gaskets.


Hide 15600D 8.REMOVE OIL FILTER PLUG

A446925

a.

Remove the 3 oil filter plugs and 3 O-rings.


b.
A446926

Remove the 3 oil filter plugs, 3 O-rings, 3 oil filter compression springs and 3 oil safety valve sub-assemblies.