Home › Engine / Hybrid System › N04C-WA (STARTING) › STARTER RELAY › from 2019.08
RM2850E _51 Engine / Hybrid System _082619 N04C-WA STARTING _0406103 STARTER RELAY G

N04C-WA STARTING  STARTER RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY ASSEMBLY

a.
A157254

Measure the resistance according to the value(s) in the table below.

Standard resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the starter relay assembly.

3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Battery voltage not applied 10 kΩ or higher