Home › Power Source / Network › CAN COMMUNICATION › CAN COMMUNICATION SYSTEM › from 2019.08
RM2850E _57 Power Source / Network _073263 CAN COMMUNICATION _0356688 CAN COMMUNICATION SYSTEM C

CAN COMMUNICATION  CAN COMMUNICATION SYSTEM  B1003  ECU Malfunction  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B1003 ECU Malfunction A malfunction in the non-volatile storage of the central gateway ECU (network gateway ECU) is detected. Central gateway ECU (network gateway ECU)
DTC Output from:

Central gateway ECU (network gateway ECU)



PROCEDURE

1.CONFIRM DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.


Result:
Result Proceed to
DTC B1003 is not output from the central gateway ECU (network gateway ECU) A
DTC B1003 is output from the central gateway ECU (network gateway ECU) B



A

B

REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)