Home › Engine / Hybrid System › N04C-WA (ENGINE MECHANICAL) › CYLINDER HEAD › from 2019.08
RM2850E _51 Engine / Hybrid System _082612 N04C-WA ENGINE MECHANICAL _0406345 CYLINDER HEAD A

N04C-WA ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR VALVE SEAT

CAUTION:

When grinding, wear safety glasses to protect your eyes from metal shards.


NOTICE:

Gradually release the seat cutter pressure to make the valve seat surface smoother.


a.
A146557C01
2.612,0.44 2.849,0.617 0.237,0.177 10 30° 2.578,2.613 2.874,2.79 0.297,0.177 10 45° 0.109,0.119 0.314,0.323 0.205,0.204 10 *a 0.109,2.25 0.325,2.436 0.216,0.187 10 *b
*a Intake Side
*b Exhaust Side


If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.

Standard Valve Sink:
Item Specified Condition
Intake 0.8 to 1.0 mm (0.0315 to 0.0394 in.)
Exhaust 1.8 to 2.0 mm (0.0709 to 0.0788 in.)