Home › General › SPECIFICATIONS › N04C-WA FUEL › from 2019.08
RM2850E _V1 General _073185 SPECIFICATIONS _0407202 N04C-WA FUEL F

SPECIFICATIONS  N04C-WA FUEL  SERVICE DATA  


FUEL INJECTOR
Fuel injector assembly Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.49 to 0.69 Ω

SUPPLY PUMP ASSEMBLY
Suction control valve Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.0 to 2.2 Ω
Fuel temperature sensor 1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
1 - 2 80°C (176°F) 0.310 to 0.326 kΩ

COMMON RAIL ASSEMBLY
Fuel pressure sensor Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 43 to 53 kΩ
1 - 3 20°C (68°F) 38 to 48 kΩ
2 - 3 20°C (68°F) 4.2 to 5.2 kΩ
Fuel pressure discharge valve 1 - 2 20°C (68°F) 0.37 to 0.57 kΩ

FUEL SENDER GAUGE

*: The output voltage changes depending on the voltage applied to the terminals.

Fuel sender gauge assembly Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 4.255 to 4.605 V*
2 - 3 Float position is E (lower) 0.345 to 0.695 V*

FUEL ADDITION CUT VALVE
Fuel addition cut valve assembly Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 10.3 to 11.3 Ω