Home › Drivetrain › A861E (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › from 2019.08
RM2850E _52 Drivetrain _082622 A861E AUTOMATIC TRANSMISSION / TRANSAXLE _0398780 PARK / NEUTRAL POSITION SWITCH G

A861E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Apply the parking brake and turn the ignition switch to ON.


b.

While the brake pedal is depressed, check that the engine starts when the shift lever is moved to N or P, and check that the engine does not start when the shift lever is in a position other than N or P.


c.

Check that the back-up light illuminates and the reverse position warning buzzer sounds when the shift lever is moved to R, and check that the back-up light does not illuminate and the reverse position warning buzzer does not sound when the shift lever is in a position other than R.


d.

If there is a malfunction, adjust the park/neutral position switch assembly.