Home › General › SPECIFICATIONS › N04C-WA LUBRICATION › 2019.08–2021.01
RM2850E _V1 General _073185 SPECIFICATIONS _0408267 N04C-WA LUBRICATION F

SPECIFICATIONS  N04C-WA LUBRICATION  SERVICE DATA  


LUBRICATION SYSTEM
Oil pressure When idling 190 kPa (1.9 kgf/cm2, 27.6 psi)

OIL PRESSURE SWITCH
Resistance (Terminal 1 - Body ground) Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher

OIL LEVEL SENSOR
Resistance (Terminal 1 - 2) Float at bottom 10 kΩ or higher
Float at top Below 1 Ω

OIL PUMP
Oil pump assembly Standard width 27.02 to 27.04 mm (1.0638 to 1.0646 in.)
Standard depth 27.027 to 27.067 mm (1.0641 to 1.0656 in.)
Standard clearance 0.047 to 0.147 mm (0.00185 to 0.00579in.)
Maximum clearance 0.17 mm (0.00669 in.)
Standard backlash (for drive gear) 0.137 to 0.302 mm (0.00539 to 0.0119in.)
Maximum backlash (for drive gear) 0.302 mm (0.0119 in.)
Standard shaft diameter (for drive gear shaft) 18.088 to 18.106 mm (0.7121 to 0.7128 in.)
Standard bush inside diameter (for drive gear bush) 18.146 to 18.187 mm (0.7144 to 0.7160 in.)
Standard clearance 0.040 to 0.099 mm (0.00157 to 0.00390in.)
Maximum clearance 0.13 mm (0.00512 in.)
Standard shaft diameter (for driven gear shaft) 17.979 to 17.997 mm (0.7078 to 0.7085 in.)
Standard bush inside diameter (for driven gear bush 18.037 to 18.054 mm (0.7101 to 0.7108 in.)
Standard clearance 0.040 to 0.075 mm (0.00157 to 0.00295in.)
Maximum clearance 0.13 mm (0.00512 in.)