| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Glow plug hole bolt | 23 | 229 | 17 |
| Cylinder head cover sub-assembly x No. 2 cylinder head cover sub-assembly | 29 | 291 | 21 |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Fan and generator V belt | for bolt A | 44 | 449 | 32 |
| for bolt B | 6.0 | 61 | 53 in.*lbf | |
| No. 1 V belt (cooler compressor to crankshaft pulley | for bolt A | 44 | 449 | 32 |
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Adjusting screw x Valve rocker arm | 29 | 291 | 21 |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Camshaft x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Timing gear case x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Oil separator assembly x Timing gear case, Cylinder block sub-assembly | 55 | 561 | 41 | |
| Oil pan sub-assembly x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Flywheel housing RH stay x Cylinder block sub-assembly, Flywheel housing | for M14 bolt | 132 | 1346 | 97 |
| for M12 bolt | 97 | 989 | 72 | |
| Flywheel housing LH stay x Cylinder block sub-assembly, Flywheel housing | for M14 bolt | 132 | 1346 | 97 |
| for M12 bolt | 97 | 989 | 72 | |
| Crankshaft pulley assembly x Crankshaft | 1st | 100 | 1020 | 74 |
| 2nd | Turn 90° | |||
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Cylinder head sub-assembly x Cylinder block sub-assembly (1 to 18 head bolt) | 1st | 60 | 612 | 44 |
| 2nd | Turn 90° | |||
| 3rd | Turn 90° | |||
| Cylinder head sub-assembly x Cylinder block sub-assembly (19 to 22 head bolt) | 55 | 561 | 41 | |
| No. 1 rocker shaft sub-assembly x Cylinder head sub-assembly | 69 | 699 | 51 | |
| Exhaust manifold x Cylinder head sub-assembly | 60 | 612 | 44 | |
| Exhaust manifold heat insulator sub-assembly x Cylinder head sub-assembly | 29 | 291 | 21 | |
| Intake manifold x Cylinder head sub-assembly | 29 | 291 | 21 | |
| No. 2 water by-pass pipe sub-assembly x Cylinder head sub-assembly | 29 | 291 | 21 | |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Injection or supply pump assembly x Timing gear case | 29 | 291 | 21 | |
| Fuel support x Cylinder block sub-assembly | 55 | 561 | 41 | |
| Fuel support x Fuel support | 29 | 291 | 21 | |
| Common rail assembly x Fuel pipe support sub-assembly | 55 | 560 | 41 | |
| No. 3 nozzle leakage pipe sub-assembly x Cylinder block sub-assembly, Fuel support | 12.7 | 130 | 9 | |
| Water by-pass pipe sub-assembly x Cylinder head sub-assembly, Timing gear case | 29 | 291 | 21 | |
| No. 2 water by-pass pipe sub-assembly x Cylinder head sub-assembly | 29 | 291 | 21 | |
| Water pipe sub-assembly x Cylinder head sub-assembly | 29 | 291 | 21 | |
| Water outlet housing x Cylinder head sub-assembly | 29 | 291 | 21 | |
| Water outlet ub-assembly x Water outlet housing | 29 | 291 | 21 | |
| No. 1 compressor mounting bracket x Timing gear cover, Cylinder block sub-assembly | 55 | 561 | 41 | |
| compressor mounting bracket set x Timing gear cover, No. 1 compressor mounting bracket | 29 | 291 | 21 | |
| Idle pulley assembly with bracket x Timing gear case | 55 | 561 | 41 | |
| Idle pulley assembly x Timing gear case | 55 | 561 | 41 | |
| Camshaft position sensor x Timing gear cover | 12 | 122 | 9 | |
| Crankshaft position sensor x Timing gear cover | 12 | 122 | 9 | |
| Water temperature sender gauge assembly x Water outlet housing | 29 | 291 | 21 | |
| No. 2 intake pipe x Intake manifold | 29 | 291 | 21 | |
| Water by-pass pipe sub-assembly x Engine assembly | Bolt | 29 | 291 | 21 |
| Union bolts | 25 | 250 | 18 | |
| Oil dipstick guide x No. 1 intake pipe | 29 | 291 | 21 | |
| EGR valve bracket x Intake manifold, No. 2 intake pipe | 29 | 291 | 21 | |
| No. 2 cylinder head cover sub-assembly x cylinder head sub-assembly | 29 | 291 | 21 | |
| Cylinder head cover sub-assembly x No. 2 cylinder head cover sub-assembly | 29 | 291 | 21 | |
| Front No. 1 engine mounting bracket LH x Cylinder block sub-assembly | 68.5 | 699 | 51 | |
| Front No. 1 engine mounting bracket RH x Cylinder block sub-assembly | 68.5 | 699 | 51 | |
| Engine mounting stabilizer x Front No. 1 engine mounting bracket | 87 | 887 | 64 | |
| Engine mounting insulator x Body | 90 | 918 | 66 | |
| Front suspension crossmember sub-assembly x Body | 160 | 1631 | 118 | |
| Steering relay rod assembly x Steering gear box assembly | for nut A | 91 | 928 | 67 |
| for nut B | 150 | 1530 | 111 | |
| Steering relay rod assembly x Tie rod end assembly LH | 155 | 1581 | 115 | |
| Vane pump assembly x Timing gear cover | 20 | 204 | 15 | |
| Vane pump oil reservoir assembly x Body | 18 | 184 | 13 | |
| Cooler compressor assembly x No. 1 compressor mounting bracket | 47 | 475 | 34 | |
| Radiator pipe x Timing gear case | 28.5 | 291 | 21 | |
| No. 1 air hose x Engine assembly | 18 | 184 | 13 | |
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| No. 1 oil nozzle sub-assembly x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Oil check valve sub-assembly x Cylinder block sub-assembly | 41.5 | 423 | 31 | |
| Crankshaft bearing cap x Cylinder block | 1st | 60 | 612 | 44 |
| 2nd | Turn 60° | |||
| 3rd | Turn 60° | |||
| Connecting rod bearing cap x Connecting rod sub-assembly | 1st | 30 | 306 | 22 |
| 2nd | Turn 60° | |||
| 3rd | Turn 60° | |||
| Flywheel housing x Cylinder block sub-assembly | for M14 bolt | 132 | 1346 | 97 |
| for M8 bolt | 29 | 291 | 21 | |
| Flywheel sub-assembly x Crankshaft | 1st | 86 | 877 | 63 |
| 2nd | Turn 45° | |||
| Front end plate x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Oil pump assembly x Cylinder block sub-assembly | 29 | 291 | 21 | |
| No. 1 Idle gear shaft x Cylinder block sub-assembly | 137 | 1397 | 101 | |
| camshaft x Cylinder block sub-assembly | 29 | 291 | 21 | |
| No. 2 Idle gear shaft x Lock plate | 55 | 561 | 41 | |
| No. 2 Idle gear thrust plate x No. 2 Idle gear shaft | 55 | 561 | 41 | |
| Timing gear cover x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Crankshaft pulley x Crankshaft | 1st | 100 | 1020 | 74 |
| 2nd | Turn 90° | |||
| Oil separator assembly x Cylinder block sub-assembly | 55 | 561 | 41 | |
| Oil separator assembly x Timing gear case | 55 | 561 | 41 | |
| Oil strainer sub-assembly x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Oil pan sub-assembly x Cylinder block sub-assembly | 29 | 291 | 21 | |
| Flywheel housing stay RH x Cylinder block sub-assembly, Flywheel housing | for M14 bolt | 132 | 1346 | 94 |
| for M12 bolt | 97 | 990 | 72 | |
| Flywheel housing stay LH x Cylinder block sub-assembly, Flywheel housing | for M14 bolt | 132 | 1346 | 94 |
| for M12 bolt | 97 | 990 | 72 | |
| Front No. 1 engine mounting bracket RH x Cylinder block sub-assembly | 68.5 | 699 | 51 | |
| Front No. 1 engine mounting bracket LH x Cylinder block sub-assembly | 68.5 | 699 | 51 | |
| Cylinder head sub-assembly x Cylinder block sub-assembly (1 to 18 head bolt) | 1st | 60 | 612 | 44 |
| 2nd | Turn 90° | |||
| 3rd | Turn 90° | |||
| Cylinder head sub-assembly x Cylinder block sub-assembly (19 to 22 head bolt) | 55 | 561 | 41 | |
| No. 1 valve rocker support sub-assembly x Cylinder head sub-assembly | 69 | 699 | 51 | |
| Adjusting screw x Valve rocker arm | 29 | 291 | 21 | |
| No. 2 cylinder head cover sub-assembly x Cylinder head sub-assembly | 29 | 291 | 21 | |
| Cylinder head cover sub-assembly x No. 2 cylinder head cover sub-assembly | 29 | 291 | 21 | |