Home › General › SPECIFICATIONS › N04C-WA CHARGING › from 2019.08
RM2850E _V1 General _073185 SPECIFICATIONS _0408505 N04C-WA CHARGING F

SPECIFICATIONS  N04C-WA CHARGING  SERVICE DATA  


CHARGING SYSTEM
Battery Electrolyte volume 1.25 or higher at 20°C (68°F)
Voltage 12.3 V or higher at 20°C (68°F)
Battery terminal and fuse Resistance Below 1 Ω
Charging circuit without load Current 10 A or higher
Voltage for 130A Type:
13.2 to 14.8 V
for 150A Type:
13.2 to 15.0 V
Charging circuit with load Current 30 A or higher

GENERATOR
Generator brush holder assembly Exposed brush length Standard 9.5 to 11.5 mm (0.375 to 0.452 in.)
Minimum 4.5 mm (0.178 in.)
Generator rotor assembly Resistance Rotor for open circuit for 130A Type:
2.3 to 2.7 Ω
for 150A Type:
1.5 to 1.9 Ω
Rotor for a short circuit 10 kΩ or higher
Slip ring diameter Standard 14.2 to 14.8 mm (0.560 to 0.582 in.)
Minimum 14.0 mm (0.552 in.)