Home › Vehicle Interior › ENGINE HOOD / DOOR › FUEL LID OPENER MOTOR ASSEMBLY › from 2021.01
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0452767 FUEL LID OPENER MOTOR ASSEMBLY G

ENGINE HOOD / DOOR  FUEL LID OPENER MOTOR ASSEMBLY  INSPECTION  


PROCEDURE

Hide 77030A 1.INSPECT FUEL LID W/ MOTOR LOCK ASSEMBLY

a.
B341148C04
1.031,1.083 1.344,1.281 0.313,0.198 10 false *a 0.604,0.073 0.917,0.271 0.313,0.198 10 false A
*a Component without harness connected
(Fuel Lid with Motor Lock Assembly)


Measure the shaft stroke.

Standard:
Area Specified Condition
A 9.9 mm (0.390 in.)



b.

Check the operation of the fuel lid with lock motor assembly.

i.

Apply battery voltage to the fuel lid with motor lock assembly connector, and check that the fuel lid with motor lock assembly operates smoothly as follows.

Standard:
Measurement ConditionArea Specified Condition
Battery positive (+) - Terminal 2
Battery negative (-) - Terminal 1
Operate


If the result is not as specified, replace the fuel lid with motor lock assembly.