79015A
1.INSPECT NO. 1 SEAT CUSHION PAD SUB-ASSEMBLY RH (OCCUPANT DETECTION SENSOR)
Check the resistance.
| *a | Component without harness connected
(No. 1 Seat Cushion Pad Sub-assembly RH (Occupant Detection Sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the No. 1 seat cushion pad sub-assembly RH (occupant detection sensor). |
||
| 1 - 2 | Occupied | Below 100 Ω |
| Not occupied | 1 MΩ or higher | |