Home › Engine / Hybrid System › N04C-VJ (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2021.01
RM2850E _51 Engine / Hybrid System _096807 N04C-VJ ENGINE CONTROL _0454123 ENGINE COOLANT TEMPERATURE SENSOR G

N04C-VJ ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89422 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

a.
A428659C01
1.958,0.958 2.333,0.385 true 1.417,0.958 1.094,0.396 true 0.948,0.208 1.26,0.406 0.313,0.198 10 false E2 2.229,0.188 2.583,0.417 0.354,0.229 10 false THW 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a
*a Component without harness connected (Engine Coolant Temperature Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the engine coolant temperature sensor.

1 (THW) - 2 (E2) 20°C (68 °F) 2.32 to 2.59 kΩ
80°C (176 °F) 0.310 to 0.326 kΩ


NOTICE:

When checking the engine coolant temperature sensor in water, keep the terminals dry. After the check, wipe the sensor dry.