Home › Engine / Hybrid System › N04C-VJ (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR › from 2021.01
RM2850E _51 Engine / Hybrid System _096807 N04C-VJ ENGINE CONTROL _0454124 INTAKE AIR TEMPERATURE SENSOR G

N04C-VJ ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89424D 1.INSPECT INTAKE AIR TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.21 to 2.65 kΩ


NOTICE:

When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.


If the result is not as specified, replace the intake air temperature sensor.