Home › Drivetrain › A861E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT SOLENOID VALVE › from 2019.08
RM2850E _52 Drivetrain _082622 A861E AUTOMATIC TRANSMISSION / TRANSAXLE _0454726 SHIFT SOLENOID VALVE G

A861E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT SOLENOID VALVE  INSPECTION  


PROCEDURE

Hide 35240E 1.INSPECT SHIFT SOLENOID VALVE S1

a.
C357041C01
0.052,0.042 0.323,0.302 0.271,0.26 10 false *a
*a Component without harness connected
(Shift Solenoid Valve S1)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
Shift solenoid valve S1 connector terminal - Shift solenoid valve S1 body 20 °C (68 °F) 11 to 15 Ω



b.

With the 12 V battery positive (+) connected to the shift solenoid valve S1 and the 12 V battery negative (-) connected to the shift solenoid valve S1 body, check the solenoid interior valve operation.

OK:

The solenoid makes an operating sound.


If the result is not as specified, replace the shift solenoid valve S1.


Hide 35240F 2.INSPECT SHIFT SOLENOID VALVE S2

HINT:

Refer to the procedures for the shift solenoid valve S1.


Hide 3.INSPECT SHIFT SOLENOID VALVE S3

HINT:

Refer to the procedures for the shift solenoid valve S1.


Hide 4.INSPECT SHIFT SOLENOID VALVE S4

HINT:

Refer to the procedures for the shift solenoid valve S1.