CAN (Controller Area Network) is a consecutive data communication system for real time applications.
This multiplex communication system for vehicles offers superior communication speeds (500 kbps) and malfunction detection functions.
CAN performs communication based on the differential voltage resulting from the combination of the CANH bus line and CANL bus line.
Malfunctions in the CAN bus (communication line) can be checked using DLC3.
DTCs related to CAN communication can be checked using the GTS.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| U0129 | Lost Communication with Brake System Control Module | Diagnosis Condition:
·
Ignition switch ON Malfunction Status: ·
No communication between ECM and brake actuator assembly Malfunction Duration: ·
10 seconds or more (1 trip detection logic) |
·
Harness or connector ·
ECM ·
Brake actuator assembly ·
CAN Communication System |
Does not come on | DTC stored |
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
Connect the GTS to the DLC3..
Turn the ignition switch to ON and turn the GTS on.
According to the display on the GTS, select "Health Check".
Check for currently output system DTCs.
| Result | Proceed to |
|---|---|
| DTC U0129 is not output | A |
| DTC U0129 is output | B |
A
Click hereEngine / Hybrid System>N04C-VJ (ENGINE CONTROL)>ECD SYSTEM>CHECK FOR INTERMITTENT PROBLEMS
B