1.INSTALL FOLLOWING PARTS
4 pad support plates
4 anti-squeal shims
2 pads
2 anti- squeal springs
2.INSTALL CALIPER
Install the caliper to the torque plate with the bolts.
Outside bolts 16 N*m (160 kgf*cm, 12 ft*lbf)
Inside bolts 78 N*m (800 kgf*cm, 58 ft*lbf)
3.CONNECT BRAKE HOSE
Install the brake hose on the brake caliper with 2 new gaskets.
30 N*m (310 kgf*cm, 22 ft*lbf)
Install the brake hose lock securely in the lock hole in the brake caliper.
4. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND BLEED BRAKE SYSTEM
5. CHECK FOR FLUID LEAKAGE