Home › Engine / Hybrid System › N04C-VJ (ENGINE CONTROL) › NITROGEN OXIDES SENSOR › from 2021.01
RM2850E _51 Engine / Hybrid System _096807 N04C-VJ ENGINE CONTROL _0459714 NITROGEN OXIDES SENSOR A

N04C-VJ ENGINE CONTROL  NITROGEN OXIDES SENSOR  REMOVAL  


PROCEDURE

Hide 89463D 1.REMOVE NO. 2 NITROGEN OXIDES SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A483627

Detach the 3 clamps.


b.

Disconnect the connector from the No. 2 nitrogen oxides sensor.


c.

Remove the 2 bolts and disconnect the No. 2 nitrogen oxides sensor.


d.
A483628N01
2.198,1.927 1.802,1.927 1.802,1.927 1.49,0.99 true 2.25,1.844 2.708,2.042 0.458,0.198 10 false SST

Using SST, remove the No. 2 nitrogen oxides sensor.

SST
09224-00012