73380A
1.INSPECT REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt Warning System)
| *a | Component without harness connected
(Rear Seat Inner Belt Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| G3-2 (E) - B-2 | Seat belt unfastened | Below 1 Ω |
| Seat belt fastened | 10 kΩ or higher | |
| G3-3 (+) - B-1 | Always | Below 1 Ω |
If the result is not as specified, replace the rear seat inner belt assembly.