Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for Single-Passenger Seat without 3 Point Type Seat Belt) › from 2021.01
RM2850E _58 Vehicle Interior _073190 SEAT BELT _0356180 REAR SEAT INNER BELT ASSEMBLY(for Single-Passenger Seat without 3 Point Type Seat Belt) A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for Single-Passenger Seat without 3 Point Type Seat Belt)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for RHD vehicles.

·

The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.

·

The procedure listed below is a representative example.

·

Use the same procedure for all rows, unless otherwise specified.



PROCEDURE

Hide 73380A 3.REMOVE REAR SEAT INNER BELT ASSEMBLY

a.

w/o Seat Belt Warning System:

i.
B472774

Remove the bolt and rear seat inner belt assembly.



b.

w/ Seat Belt Warning System:

i.
B602698

Disconnect the connector.


ii.
B602689

Detach the clamp.


iii.

Remove the bolt and rear seat inner belt assembly.