1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
88310A
2.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT
Remove the No. 1 V (cooler compressor to crankshaft pulley) belt.
Click hereEngine / Hybrid System>N04C-VJ (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
88410
3.SEPARATE COMPRESSOR AND MAGNETIC CLUTCH
Remove the 2 bolts and separate the air conditioning hoses.
Disconnect the connector.
Remove the 4 bolts and separate the compressor together with hose.
Do not apply excessive force to the hoses.
88720A
4.DISCONNECT AIR CONDITIONING HOSE AND ACCESSORY
Remove the bolt and disconnect the discharge hose.
Remove the O-ring from the discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
Remove the bolt and disconnect the suction hose.
Remove the O-ring from the suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.