16361A
1.INSTALL FAN AND GENERATOR V BELT
Install the fan and generator V belt.
Turn the adjusting B bolt and adjust the tension of the fan and generator V belt (See page ).
Tighten the A bolt.
Tighten the B bolt.
2.INSTALL NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT
Install the No. 1 V (cooler compressor to crankshaft pulley) belt.
Turn the adjusting B bolt and adjust the tension of the No. 1 V (cooler compressor to crankshaft pulley) belt (See page ).
Tighten the A bolt.
Tighten the B bolt.
6.0 N*m (61 kgf*cm, 53 in.*lbf)
3.INSPECT FOR DRIVE BELT
51441D
4.INSTALL NO. 1 ENGINE UNDER COVER
Install the No. 1 engine under cover with the 4 screws and 6 bolts.