1.REPAIR VALVE SEAT
When grinding, wear safety glasses to protect your eyes from metal shards.
Gradually release the seat cutter pressure to make the valve seat surface smoother.
| *a | Intake Side |
| *b | Exhaust Side |
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
| Item | Specified Condition |
|---|---|
| Intake | 0.8 to 1.0 mm (0.0315 to 0.0394 in.) |
| Exhaust | 1.8 to 2.0 mm (0.0709 to 0.0788 in.) |