Home › Engine / Hybrid System › N04C-VJ (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR › from 2021.01
RM2850E _51 Engine / Hybrid System _096890 N04C-VJ EMISSION CONTROL _0461594 EXHAUST GAS TEMPERATURE SENSOR A

N04C-VJ EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE EXHAUST GAS TEMPERATURE SENSOR

a.
A477919

Disconnect the exhaust gas temperature sensor connector and detach the 4 clamps.


b.

Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.


Hide 2.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.
A448753

Disconnect the No. 2 exhaust gas temperature sensor connector and detach the clamp.


b.

Using a 17 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.


Hide 3.REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

a.
A146796

Disconnect the No. 3 exhaust gas temperature sensor connector.


b.

Using a 17 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.


Hide 4.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.
A261412

Disconnect the No. 4 exhaust gas temperature sensor connector and detach the 2 clamps.


b.

Using a 17 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor.