Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ECD SYSTEM › from 2021.01
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355844 ECD SYSTEM U

N04C-UH ENGINE CONTROL  ECD SYSTEM  TERMINALS OF ECM  


A066714E83
1.25,0.583 1.667,0.833 0.417,0.25 2.667,0.583 3.083,0.833 0.417,0.25 4.25,0.583 4.667,0.833 0.417,0.25 5.583,0.583 6,0.833 0.417,0.25 1.323,0.625 1.74,0.823 0.417,0.198 10 false B59 2.75,0.625 3.177,0.823 0.427,0.198 10 false B60 4.333,0.635 4.771,0.833 0.438,0.198 10 false A52 5.656,0.635 6.063,0.833 0.406,0.198 10 false A54

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition".

Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A52-2 (BATT) - B60-7 (E1) GR - BR Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
A54-16 (IGSW) - B60-7 (E1) B - BR Ignition switch Ignition switch ON 11 to 14 V
A54-1 (+B) - B60-7 (E1) B - BR Power source of ECM Ignition switch ON 11 to 14 V
A54-13 (MREL) - B60-7 (E1) W - BR EFI relay Ignition switch ON 11 to 14 V
5 seconds after ignition switch off 0 to 2 V
B59-18 (VC) - B59-28 (E2) L - R Power source of sensor (a specific voltage) Ignition switch ON 4.5 to 5.5 V
A54-22 (VPA) - A54-28 (EPA) G - LG Accelerator pedal position sensor (for engine control) Ignition switch ON, accelerator pedal fully released 0.6 to 1.0 V
Ignition switch ON, accelerator pedal fully depressed 2.8 to 3.6 V
A54-23 (VPA2) - A54-29 (EPA2) GR - G Accelerator pedal position sensor (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully released 1.4 to 1.8 V
Ignition switch ON, accelerator pedal fully depressed 3.6 to 4.4 V
A54-20 (VCPA) - A54-28 (EPA) L - LG Power source of accelerator pedal position sensor Ignition switch ON 4.5 to 5.5 V
B60-24 (VG) - B60-32 (EVG) G - L Mass air flow meter sub-assembly Engine is warmed up: Idling 1.5 to 1.9 V
B59-31 (THA) - B59-28 (E2) V - R Intake air temperature sensor
(built into mass air flow meter sub-assembly)
Engine is warmed up: Idling, IAT at 0 to 80°C (32 to 176°F) 0.5 to 3.4 V
B59-20 (THIA) - B59-28 (E2) Y - R Intake air temperature sensor (after turbocharged) Engine is warmed up: Idling, IAT at 0 to 80°C (32 to 176°F) 1.0 to 4.4 V
B59-19 (THW) - B59-28 (E2) G - R Engine coolant temperature sensor Idling, ECT at 80 to 120°C (176 to 248°F) 0.2 to 1.0 V
B59-24 (#1) - B60-7 (E1)
B59-23 (#2) - B60-7 (E1)
B59-22 (#3) - B60-7 (E1)
B59-21 (#4) - B60-7 (E1)
P - BR
LG - BR
LG - BR
GR - BR
Injector assembly Injector assembly Idling with warm engine Pulse generation (See waveform 1)
B60-23 (G+) - B60-31 (G-) R - G Camshaft position sensor Idling with warm engine Pulse generation (See waveform 2)
B59-27 (NE+) - B59-34 (NE-) B - W Crankshaft position sensor Idling with warm engine Pulse generation (See waveform 2)
A54-18 (STP) - B60-7 (E1) P - BR Stop light switch assembly Brake pedal depressed 11 to 14 V
Brake pedal released 0 to 2 V
A54-8 (ST1-) - B60-7 (E1) V - BR Stop light switch assembly (opposite to STP) Ignition switch ON, brake pedal depressed 0 to 2 V
Ignition switch ON, brake pedal released 11 to 14 V
A54-17 (TC) - B60-7 (E1) P - BR Terminal TC of DLC3 Ignition switch ON 11 to 14 V
B60-18 (STA) - B60-7 (E1) B - BR Starter signal Cranking 6 V or more
A54-6 (TAC) - B60-7 (E1) B - BR Engine speed Idling Pulse generation (See waveform 3)
A54-9 (W) - B60-7 (E1) L - BR MIL MIL illuminated 0 to 2 V
MIL not illuminated 11 to 14 V
A54-19 (SPD) - B60-7 (E1) Y - BR Speed signal from combination meter Ignition switch ON, driving wheel slowly rotated Pulse generation (See waveform 4)
B60-28 (PIM) - B59-28 (E2) P - R Manifold absolute pressure sensor Applied negative pressure of 93 kPa [abs] (697 mmHg, 27.5 in.Hg) 0.2 to 0.5 V
Applied positive pressure of 150 kPa [abs] (1125 mmHg, 44.3 in.Hg) 1.0 to 1.4 V
A54-14 (IREL) - B60-7 (E1) R - BR EDU relay Ignition switch ON or Idling 0 to 2 V
B59-26 (PCR1) - B59-28 (E2) L - R Fuel pressure sensor (built into common rail assembly) Idling (Approximately 30 MPa (306 kgf/cm2, 4351 psi)) 1.3 to 1.7 V
B59-29 (THF) - B59-28 (E2) Y - R Fuel temperature sensor (built into injection or supply pump assembly) Ignition switch ON 1.2 to 1.6 V
B60-22 (VCG) - B60-31 (G-) L - G Power source of camshaft position sensor Ignition switch ON 4.5 to 5.5 V
B59-2 (PCV+) - B59-1 (PCV-) V - L Suction control valve (built into injection or supply pump assembly) Idling Pulse generation (See waveform 5)
B60-33 (EGLS) - B59-28 (E2) V - R EGR position sensor (built into EGR valve assembly) Ignition switch ON 3.8 to 4.2 V
Idling with warm engine 3.0 to 3.5 V
B60-3 (EGRS) - B60-7 (E1) G - BR EGR valve assembly Ignition switch ON 0 to 2 V
Engine is warmed up, engine speed 1500 rpm Pulse generation (See waveform 6)
B59-25 (INJF) - B60-7 (E1) B - BR Injector driver assembly Idling with warm engine Pulse generation (See waveform 7)
B60-20 (VLU) - B59-28 (E2) W - R Throttle position sensor (built into diesel throttle body assembly) Ignition switch ON, throttle valve fully closed 0.5 to 1.5 V
Ignition switch ON, throttle valve fully opened 3.2 to 4.2 V
B60-4 (LUSL) - B60-7 (E1) W - BR Throttle actuator (built into diesel throttle body assembly) duty signal Accelerator pedal released → Accelerator pedal depressed (when throttle motor is operating) Pulse generation (See waveform 8)
B60-1 (THCO) - B59-28 (E2) W - R Exhaust gas temperature sensor (down stream) Idling with warm engine 4.5 to 4.9 V
B60-2 (THCI) - B59-28 (E2) R - R Exhaust gas temperature sensor (up stream) Idling with warm engine 4.5 to 4.9 V
B60-27 (PEX) - B59-28 (E2) P - R Differential pressure sensor Idling with warm engine 0.5 to 1.0 V
A52-15 (RGSW) - B60-7 (E1) R - BR DPF switch signal DPF switch on 11 to 14 V
DPF switch off 0 to 2 V
B60-8 (EXB) - B60-7 (E1) GR - BR Exhaust brake Exhaust brake operating 11 to 14 V
A54-10 (W2) - B60-7 (E1) R - BR DPF indicator DPF indicator on (Ignition switch ON) 0 to 2 V
DPF indicator off (idling) 11 to 14 V
B60-16 (PMB) - B60-7 (E1) G - BR DPF warning buzzer Buzzer off 11 to 14 V
Buzzer on Alternating 0 to 2 Vand 11 to 14 V at intervals of 0.5seconds
A52-16 (NUSW) - B60-7 (E1) GR - BR Exhaust brake neutral switch assembly Ignition switch ON, shift position is neutral 11 to 14 V
Ignition switch ON, shift position is not neutral 0 to 2 V
A52-9 (CLSW) - B60-7 (E1) G - BR Exhaust brake clutch switch (exhaust retarder switch assembly) Clutch pedal depressed 0 to 2 V
A52-13 (EXSW) - B60-7 (E1) P - BR Combination switch Exhaust brake switch on 11 to 14 V
Exhaust brake switch off 0 to 2 V
B60-12 (RSW) - B60-7 (E1) R - BR Back-up light switch Back-up light switch off 0 to 2 V
Back-up light switch on 11 to 14 V
A52-17 (CANH) - B60-7 (E1) B - BR CAN communication line Engine stop and Ignition switch ON Pulse generation (See waveform 9)
A52-28 (CANL) - B60-7 (E1) W - BR CAN communication line Engine stop and Ignition switch ON Pulse generation (See waveform 10)
A54-31 (EFI+) - B60-7 (E1) P - BR Communication line (between ECM and TCM) Idling Pulse generation (See waveform 11)
A54-30 (EFI-) - B60-7 (E1) GR - BR Communication line (between ECM and TCM) Idling Pulse generation (See waveform 12)
A54-25 (ECT+) - B60-7 (E1) R - BR Communication line (between ECM and TCM) Idling Pulse generation (See waveform 11)
A54-24 (ECT-) - B60-7 (E1) G - BR Communication line (between ECM and TCM) Idling Pulse generation (See waveform 12)
B60-7 (E1) - Body ground BR - - Ground Always Below 1 Ω
B59-28 (E2) - Body ground R - - Ground Always Below 1 Ω
B59-7 (E01) - Body ground BR - - Ground Always Below 1 Ω
B59-6 (E02) - Body ground BR - - Ground Always Below 1 Ω
B60-19 (EC) - Body ground BR - - Ground Always Below 1 Ω

Waveform 1


A257502E02
2.917,2.333 3.26,2.531 0.344,0.198 10 false GND 2.917,1.958 3.26,2.156 0.344,0.198 10 false GND 2.917,1.573 3.26,1.771 0.344,0.198 10 false GND 2.917,1.177 3.26,1.375 0.344,0.198 10 false GND 0.188,1.021 0.667,1.219 0.479,0.198 10 false (A) #1 0.188,1.375 0.667,1.583 0.479,0.208 10 false (B) #3 0.188,1.771 0.646,1.979 0.458,0.208 10 false (C) #4 0.188,2.146 0.656,2.354 0.469,0.208 10 false (D) #2 2.469,0.083 3.115,0.281 0.646,0.198 10 false 5 V/DIV. 1.188,2.698 2.125,2.917 0.938,0.219 10 false 20 msec./DIV.

a.

Injector assembly No. 1 injection signal (A)


b.

Injector assembly No. 3 injection signal (B)


c.

Injector assembly No. 4 injection signal (C)


d.

Injector assembly No. 2 injection signal (D)

Terminal No. (Symbol) (A) B59-24 (#1) - B60-7 (E1)
(B) B59-22 (#3) - B60-7 (E1)
(C) B59-21 (#4) - B60-7 (E1)
(D) B59-23 (#2) - B60-7 (E1)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the injector injection.




Waveform 2


A257503E02
2.552,0.323 3.198,0.521 0.646,0.198 10 false 5 V/DIV. 1.219,2.719 2.125,2.906 0.906,0.188 10 false 20 msec./DIV. 0.281,1.052 0.646,1.208 0.365,0.156 10 false (B) G 0.188,1.792 0.667,1.948 0.479,0.156 10 false (A) NE 2.948,1.25 3.302,1.406 0.354,0.156 10 false GND 2.969,1.823 3.323,1.979 0.354,0.156 10 false GND

a.

Crankshaft position sensor signal (A)


b.

Camshaft position sensor signal (B)

Terminal No. (Symbol) (A) B59-27 (NE+) - B59-34 (NE-)
(B) B60-23 (G+) - B60-31 (G-)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the engine speed.




Waveform 3


A257504E02
2.917,1.656 3.26,1.854 0.344,0.198 10 false GND 2.594,0.281 3.24,0.479 0.646,0.198 10 false 5 V/DIV. 1.229,2.656 2.146,2.906 0.917,0.25 10 false 20 msec./DIV.

a.

Engine speed signal

Terminal No. (Symbol) A54-6 (TAC) - B60-7 (E1)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.




Waveform 4


A224174E03
2.927,1.969 3.292,2.167 0.365,0.198 10 false GND 2.552,0.188 3.115,0.385 0.563,0.198 10 false 5 V/DIV. 1.104,2.854 2.01,3.083 0.906,0.229 10 false 20 msec./DIV.

a.

Vehicle speed signal

Terminal No. (Symbol) A54-19 (SPD) - B60-7 (E1)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Ignition switch ON, driving wheel slowly rotated

HINT:

The wavelength becomes shorter as the vehicle speed increases.




Waveform 5


A257505E02
2.972,1.585 3.326,1.788 0.354,0.203 10 GND 2.492,0.339 3.105,0.541 0.613,0.201 10 10 V/DIV. 1.315,2.678 2.137,2.839 0.822,0.161 10 5 msec./DIV.

a.

Suction control valve signal

Terminal No. (Symbol) B59-2 (PCV+) - B59-1 (PCV-)
Tool Setting 10 V/DIV., 5 msec./DIV.
Condition Idling

HINT:

The waveform varies depending on the suction control valve operation.




Waveform 6


A257506E02
2.865,1.844 3.198,2.042 0.333,0.198 10 false GND 2.615,0.313 3.167,0.51 0.552,0.198 10 false 5 V/DIV. 1.25,2.719 2.083,2.875 0.833,0.156 10 false 5 msec./DIV.

a.

EGR position sensor signal

Terminal No. (Symbol) B60-3 (EGRS) - B60-7 (E1)
Tool Setting 5 V/DIV., 5 msec./DIV.
Condition Engine is warmed up, engine speed 1500 rpm



Waveform 7


A257507E02
2.938,1.646 3.281,1.844 0.344,0.198 10 false GND 2.563,0.323 3.208,0.521 0.646,0.198 10 false 2 V/DIV. 1.271,2.708 2.177,2.896 0.906,0.188 10 false 20 msec./DIV.

a.

Injector injection confirmation signal

Terminal No. (Symbol) B59-25 (INJF) - B60-7 (E1)
Tool Setting 2 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the injector injection.




Waveform 8


A257508E02
2.875,2.031 3.229,2.229 0.354,0.198 10 false GND 2.573,0.375 3.219,0.573 0.646,0.198 10 false 1 V/DIV. 1.271,2.75 2.094,2.906 0.823,0.156 10 false 2 msec./DIV.

a.

Throttle actuator signal

Terminal No. (Symbol) B60-4 (LUSL) - B60-7 (E1)
Tool Setting 1 V/DIV., 2 msec./DIV
Condition Accelerator pedal released → Accelerator pedal depressed (when throttle motor is operating)

HINT:

The waveform varies depending on the throttle valve operation




Waveform 9 (Reference)


A224179E04
3.031,2.031 3.365,2.229 0.333,0.198 10 false GND 2.531,0.385 3.177,0.583 0.646,0.198 10 false 1 V/DIV. 1.208,2.76 2.125,2.917 0.917,0.156 10 false 10 μsec./DIV.

a.

CAN communication signal

Terminal No. (Symbol) A52-17 (CANH) - B60-7 (E1)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine stop and Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.




Waveform 10 (Reference)


A224180E04
3.031,1.927 3.354,2.125 0.323,0.198 10 false GND 2.531,0.385 3.063,0.583 0.531,0.198 10 false 1 V/DIV. 1.302,2.615 2.26,2.771 0.958,0.156 10 false 10 μsec./DIV.

a.

CAN communication signal

Terminal No. (Symbol) A52-28 (CANL) - B60-7 (E1)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine stop and Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.




Waveform 11


a.
A426545E01
2.781,0.323 3.385,0.531 0.604,0.208 10 false 1 V/DIV. 1.292,2.688 2.271,2.885 0.979,0.198 10 false 2 msec./DIV. 2.99,2.042 3.365,2.219 0.375,0.177 10 false GND

Communication line (between ECM and TCM)

Terminal No. (Symbol) A54-31 (EFI+) - B60-7 (E1)
A54-25 (ECT+) - B60-7 (E1)
Tester Range 1 V/DIV., 2 msec./DIV.
Condition Idling



Waveform 12


A426546E01
2.76,0.385 3.396,0.573 0.635,0.188 10 false 1 V/DIV. 2.99,2.052 3.385,2.25 0.396,0.198 10 false GND 1.281,2.688 2.25,2.875 0.969,0.188 10 false 2 msec./DIV.

a.

Communication line (between ECM and TCM)

Terminal No. (Symbol) A54-30 (EFI-) - B60-7 (E1)
A54-24 (ECT-) - B60-7 (E1)
Tester Range 1 V/DIV., 2 msec./DIV.
Condition Idling