Home › General › SPECIFICATIONS › N04C-VJ CHARGING › from 2021.01
RM2850E _V1 General _073185 SPECIFICATIONS _0463799 N04C-VJ CHARGING F

SPECIFICATIONS  N04C-VJ CHARGING  TORQUE SPECIFICATIONS  


GENERATOR
Part Tightened N*m kgf*cm ft.*lbf
Retainer plate x Generator drive end frame 2.3 23 20 in.*lbf
Generator coil assembly x Generator drive end frame 5.9 60 52 in.*lbf
Generator brush holder assembly x Generator coil assembly 1.8 18 16 in.*lbf
Rear generator end cover x Generator coil assembly 4.6 46 40 in.*lbf
SST (A) x SST (B) 39 398 29
Generator pulley x Generator rotor assembly 132.5 1351 98
Generator bracket x Engine assembly 125 1275 92
Generator assembly x Engine assembly 55 561 41
Terminal B x Generator assembly 9.8 100 87 in.*lbf
Wire harness x Generator bracket 8.4 86 74 in.*lbf