86259A
1.INSTALL MICROPHONE HANGER
Move the microphone hanger in the direction indicated by the arrow shown in the illustration, attach the guide and claw and install the microphone hanger.
55412D
2.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL
58841A
3.INSTALL SHIFTING HOLE COVER (for Automatic Transmission)
58123A
4.INSTALL SHIFT AND SELECT LEVER SUPPORT (for Manual Transmission)
Install the shift lever hole cover with the 4 bolts.
58286
5.INSTALL NO. 1 SHIFT AND SELECT LEVER BOOT (for Manual Transmission)
for RHD:
Install the shift lever boot with the 3 bolts.
for LHD:
Install the shift lever boot with the 4 bolts.
58534A
6.INSTALL TRANSMISSION COVER MAT (for Manual Transmission)
Install the transmission cover mat to the shift and select lever support.
33504F
7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
Gently rotate the shift lever knob sub-assembly by hand until it locks.
After locking, further tighten by 1.5 turns.
After tightening, rotate and adjust the tightened direction so that the shift pattern is positioned within +/-10° of the front of the vehicle.
86250
8.INSTALL AMPLIFIER MICROPHONE ASSEMBLY
Insert the amplifier microphone assembly into the microphone hanger and connect the plug to install it.