Home › General › SPECIFICATIONS › 2TR-FE LUBRICATION › from 2021.01
RM2850E _V1 General _073185 SPECIFICATIONS _0367036 2TR-FE LUBRICATION F

SPECIFICATIONS  2TR-FE LUBRICATION  SERVICE DATA  


Engine oil pressure switch Oil pressure Standard at idling 29 kPa (0.3 kgf/cm2, 4.2 psi) or more
at 3000 rpm 160 to 490 kPa (1.6 to 5.0 kgf/cm2, 23 to 71 psi) or more
Oil level sensor Resistance Standard ON, 20°C (68°F) Below 1 Ω
OFF 20°C (68°F) Below 1 Ω
ON, 60°C (140°F) Below 1 Ω
OFF, 60°C (140°F) 10 kΩ or higher
Oil pump Tip clearance Standard 0.040 to 0.160 mm (0.0016 to 0.0063 in.)
Maximum 0.26 mm (0.0102 in.)
Side clearance Standard 0.025 to 0.075 mm (0.0010 to 0.0030 in.)
Maximum 0.130 mm (0.0051 in.)
Body clearance Standard 0.025 to 0.325 mm (0.0010 to 0.0128 in.)
Maximum 0.425 mm (0.0167 in.)

STANDARD OIL GRADE
Oil Grade Oil Viscosity
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving", SN PLUS "resource-conserving" or SP "resource-conserving", or ILSAC GF-6A multigrade engine oil 0W-20
5W-20
5W-30
10W-30

STANDARD CAPACITY
Item Specified Condition
Drain and refill with oil filter change 6.0 liters (6.3 US qts, 5.3 Imp. qts)
Drain and refill without oil filter change 5.4 liters (5.7 US qts, 4.8 Imp. qts)
Dry fill 6.3 liters (6.7 US qts, 5.5 Imp. qts)