Home › Engine / Hybrid System › 1HZ (LUBRICATION) › LUBRICATION SYSTEM › from 2021.01
RM2850E _51 Engine / Hybrid System _073154 1HZ LUBRICATION _0355964 LUBRICATION SYSTEM G

1HZ LUBRICATION  LUBRICATION SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK ENGINE OIL QUALITY

a.

Check the oil for deterioration, entry of water, discoloring or thinning.

If the quality is poor, replace the oil.

Engine Oil:
Oil Grade Oil Viscosity (SAE)
API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0
·

5W-30

·

10W-30





Hide 2.CHECK ENGINE OIL LEVEL

a.
A423071

The oil level should be between the "L" and "F" marks on the dipstick.

If low, check for leakage and add oil up to "F" mark.

NOTICE:

Do not fill with engine oil above the "F" mark.



Hide 3.REMOVE OIL PRESSURE SENDER GAUGE

Hide 4.INSTALL OIL PRESSURE GAUGE

A423072

Hide 5.WARM UP ENGINE

a.

Allow the engine to reach normal operating temperature.


Hide 6.CHECK OIL PRESSURE

Oil pressure:

At idling 0.3 kg/cm2 (4.3 psi, 29 kPa) or more

At 3,000 rpm 2.5 kg/cm2 (36 psi, 245 kPa) or more


Hide 7.REMOVE OIL PRESSURE GAUGE

Hide 8.REINSTALL OIL PRESSURE SENDER GAUGE

Torque:

153 kg*cm (11 ft*lb, 15 N*m)


Hide 9.START ENGINE AND CHECK FOR LEAKS