2011-2016 FJ Cruiser · Service Manual ENGINE

PRECAUTION

Precautions · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1.INITIALIZATION

NOTICE:
  1. Perform the Reset Memory (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
  2. If the ECM has been replaced or Reset Memory (AT initialization) has been performed, set up the function of the ATF (Automatic Transmission Fluid) temperature warning light (Click here).

HINT:
Initialization can not be completed by only removing the battery.


2.FOR USING INTELLIGENT TESTER

CAUTION:
Observe the following items for safety reasons:

  1. Read its instruction books before using the tester.
  2. Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
  3. When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.
← TORQUE SPECIFICATIONS (from Nov 2010)PRECAUTION (from Aug 2009) →