2011-2016 FJ Cruiser · Service Manual CRUISE CONTROL SYSTEM

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jul 2007


DTC CHECK
  1. Connect a intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester ON.

  4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Read the DTCs.


CLEAR DTC
  1. Connect a intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester ON.

  4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Erase the DTCs.

← DIAGNOSIS SYSTEM (from Nov 2010)FAIL-SAFE CHART (from Jul 2007) →